IN-VAC
What is IN-VAC? IN-VAC is a vacuum filling machine made for both horizontal and vertical toner cartridges and reservoirs.
The machine comes equipped with 4 silos. Extra silos are sold separately.
HOW DOES IT WORK?
IN-VAC fills reservoirs and toner cartridges through a vacuum environment through a “Vacuum Chamber”. This process is conducted either through the use of four silos that comes with the system or through powder bottles. As the vacuum occurs inside the chamber, switches are open to let the toner powder flow trough suction. This technology of filling Ink Cartridges has been used by PARAI for over 9 years and was subsequently patented (PI 003237-9). The reservoir and cartridge vacuum filling process with toner powder results in a significantly high quality product. The particles are distributed in loose form making it possible for the vacuum system to suck them all from the air, avoiding polluting the work area and also preventing any damages to the operator’s health.
WORLD SUCCESS
The readers of Recharge Magazine (www.rechargermag.com) voted IN-VAC one of the five best products in the world in 2007. IN-VAC is currently being considered again by the nominees of the Readers’ Choice Awards (considered the Oscar of the Recycling Business) to receive BEST NEW PRODUCT award. This Election will take place in the Las Vegas, Nevada at the World EXPO 2008 convention.
We encourage you to log in and vote for IN-VAC: http://media.101com.com:8080/scripts/perseus6.exe
CONTENTS
1) IN-VAC is structured by an iron frame with electrostatic painting which groups together all the elements to form the machines.
2) The toner powder is placed into four silos situated on the upper part of the machine. When equipped with all four silos each silo bears 60 Kg of powder, 15 kg each.
PS. IN-VAC is composed of four aluminum silos and one kilogram bottle, peaks and switches. Other bottles, peaks and switches can be purchased separately. Customized bag projects, with a larger storage capacity can be obtained.
3) The system comes with a free holder that allows an easier placement of the toner inside silos or bags, so enabling a better hygiene of the working place.
4) The reservoirs and toner cartridges are placed inside the vacuum chamber, where a scale for measuring the quantity of powder which fills the recipients is found.
5) Beneath the vacuum chamber lies the control box. It contains an air compressor used to mix the toner powder equally, before starting the filling process.
6) A professional 800 watts vacuum cleaner accompanies the system. Its filter possesses a 3kg storage capacity and its 0,3 micron diameter screen is able to retain any type and size powder particles.
7) KIT FOR FILLING CARTRIDGES HORIZONTALLY – For filling cartridges in the horizontal position it is necessary to acquire this KIT. The KIT is connected inside the vacuum chamber and permits the horizontal movement of the filling hose.
MAIN FEATURES
1) HIGH FILLING SPEED
IN-VAC has an outflow of up to 500 grams in only 12 seconds. The operator manually regulates the opening, the outflow and the closing of the toner powder flow. It takes, in average, only 05 seconds to fill a 140 grams capacity cartridge.
2) VERSATILITY
IN-VAC allows the operator to work with different kinds of toner powders. Originally the IN-VAC goes with four silos / whoppers and 1 kilogram bottle. Extra silos and peaks with switches for bottles can be acquired separately.
3) LOW SOUND POLLUTION
The air compressor that creates the vacuum inside the chamber takes only 2 seconds to remove all the air from the system. Once the vacuum process is finished, the filling of reservoirs and cartridges can start.
4) HIGH PRECISION
A high precision scale monitors the quick filling process through an electronic display.
5) HEIGHT REGULATION
The scale installed inside the vacuum chamber may be regulated to receive several kinds of reservoirs found in the market, up to 40 cm high.
6) MAINTENANCE
IN-VAC does not utilize a programmed electronic compound that typically causes the most common of system failures. Therefore associated maintenance cost is extremely low. The machine operator himself can provide the maintenance for the machine.
7) LOW COST
The technology used in the IN-VAC results in very low cost for its consumers.
8) CLEAN WORK AREA
The location of the reservoir to be filled (inside the vacuum chamber) allows no pollution during the filling process. It is different from a typical dirty work area where the toner powder’s particles mingle with the air. IN-VAC filling process allows the air to stay inside the vacuum chamber, avoiding contamination of the work area.
9) SALUBRITY FOR THE OPERATOR
Toner powder represents a risk for human health. Considering this fact, we have created IN-VAC free of toner powder contact. Since there is no contact with the powder on the silos or filling reservoirs, minimizing human contact which ultimately represents risk free for the machine operator.
10) MARKETING
Who brings customers to see their toner labs? At the most part, no one.
Using IN-VAC you will be able to bring clients to your lab to view and see the filling process for themselves. It is totally designed to AVOID POLLUTION, promote RESPECT for the ENVIRONMENT, protect the machine operator, and to offer electronic PRECISION and high QUALITY filling.
CUSTOMER’S FEEDBACK
“By acquiring the IN-VAC, our company CANAL VERDE increased productivity, saved energy and guaranteed a salubrious environment for the employers. INVAC is so efficient that we are replacing our bottle filling machines”. CANAL VERDE Company – Sao Paulo/Brazil E-mail: erlon.vendas@canalverde.com.br
“IN-VAC provides great revenue and very low pollution”.
ATTANA LASER Company – Sao Paulo/Brazil E-mail: roberto@attanalaser.com.br
“IN-VAC gave us perfect working conditions in regards to precision, hygiene and celerity”. BURDEN BUSINESS Company – Sao Paulo/Brazil E-mail: andy@burden.com.br